HP Q2612A Refill Instructions

Use the hole making tool (not included) and make a hole on the cartridge in the white spot indicated by the photograph above. If the small piece of plastic has fallen into the cartridge, it must be removed, as this can damage your cartridge or cause print defects.

IMPORTANT: You must dispose of any original toner in the cartridge as much as possible before refilling. Dispose of toner properly into a trash can, or use a vacuum with a hose for best results (if possible). Do not overfill the cartridge by pouring the entire toner powder into the cartridge. Use half the bottle now, and the rest at a later time. Overfilling can and will damage a cartridge.

Before opening the bottle of toner, turn it upside down and tap it on a table to loosen the toner and allow it to flow freely. Remove the cap and pull the seal off the bottle. Attach the funnel cap making to sure it is on tightly. Tilt the funnel cap toward the filling hole and insert it into the hole. If the toner stops flowing before the cartridge is full, simply remove the toner, close the cap, turn the bottle upside down and tap it on a table. Once the cartridge is full seal the hole with the plug.

Do not press down on the plug since the cartridge is resting on a table this can actually damage the photo-optic drum. Instead hold one end of the cartridge up off the table and twist the plug until it fully sealed. Now gently shake the cartridge side to side to distribute the toner.

This cartridge may also be known as Q 2612A or Q-2612A or Q2612A or hp-q2612a Q2612AD or hp-q2612ad

The HP Q2612A cartridge refill procedure can also be following for refilling the following printers:

LaserJet M1319
LaserJet M1319f
LaserJet 1010
LaserJet 1012
LaserJet 1018
LaserJet 1020
LaserJet 1022
LaserJet 1022n
LaserJet 1022nw
LaserJet 3015
LaserJet 3020
LaserJet 3030
LaserJet 3050
LaserJet 3052
LaserJet 3055

YOU CAN GET THE HP Q2612A REFILL KIT AT DISCOUNT PRICE HERE